If you frequently cruise around streams on a boat or when fishing, we are aware of the advantages of having an accurate GPS chart. Boating can purchase high-quality GPS map charts from Navionics that are loaded with extensive information on aids to navigation, water depth, and more. To ensure that they present the most current data, these maps require being updated on a regular basis.
This article on our website will demonstrate ways to update your Navionics GPS map chart so that you consistently receive the most current data available.
 |
| How to Update Your Navionics GPS Map chart |
1. Connect your GPS device to your computer.
Establishing relationships the Navionics GPS Map Update device to your computer is the first step in adjusting your Navionics GPS map chart. To accomplish this, however, you're going to require a USB cord that works with the GPS device you have gadget. Establish a connection the device to the computer and then turn it on.
2. Install the Navionics Chart Installer.
The Navionics Chart Installer need to be downloaded and put in on your computer next. The Navionics website provides this training programmed without charge. Run the installation file after downloading the setup programmed, then following the instructions given on the screen to successfully complete the process of installing.
3. Start the Navionics Chart Installer.
Beginning the application after installing Microsoft Navionics Chart Installer. The GPS device should have been immediately detected by the application, and is going to display it on the screen. Check your USB cable connection should your gadget isn't being for additional debugging advice, refer to the operator documentation regarding the GPS device.
4. Select the Navionics GPS map chart you want to update.
You will be sought to specify the Navionics GPS map chart you please and would like to modify when the Navionics Chart Installer determines your GPS instrument. From the list of available visualizations, choose the map you want, then press the power supply "Update," in order a button.
5. Download the update.
The update for your GPS map chart has been successfully downloaded using the Navionics Chart Installer. Depending on the size of the update and the download velocity of the connection you are using, the whole procedure might necessitate longer than expected. Once the download is finished, select "Install" to launch the firmware update procedure.
6. Install the update.
The most recent version for the GPS map chart is going to be installed via windows Navionics Chart Launcher. Your GPS device's the monitor can show a progress bar or message throughout the entire process. Disconnect your GPS from your computer and turn it off after the firmware upgrade goes finished.
7. Test your updated Navionics GPS map chart.
Switch up the GPS device to verify the updated Navionics GPS map chart whenever you've finished the firmware upgrade routine. Verify provided the visualisation is correct and also that all the information is up to minute.
At last, changing information Navionics GPS map chart has become an important chore than each of the boater or fishermen ought to bring while out on a regular basis. You will may have rest of mind while enjoying vacation when you follow the straightforward instructions to make sure your GPS map chart is current and keeps up for date.